Knowledge Management System Of Institute of process engineering,CAS
超重力场电沉积镍箔及其机械性能 | |
王明涌; 王志; 刘婷; 郭占成 | |
2009 | |
Source Publication | 过程工程学报
![]() |
Issue | 03Pages:568-573 |
Abstract | 在超重力条件下电沉积镍箔,考察了超重力对镍箔沉积的电流效率、槽电压和单位能量消耗的影响,并对所制镍箔的表面形貌和晶体结构及机械性能进行了表征.结果表明,随着重力系数G和沉积电流密度的增加,镍箔晶粒有细化的趋势.所得镍箔抗拉强度由常重力(G=1)时的933MPa增加到G=443时的1190MPa,硬度则由224Hv增加到375Hv.超重力条件下(G=111),随着沉积电流密度由0.1A/cm2增加至0.4A/cm2,镍箔的抗拉强度和硬度分别由1054MPa和285Hv增加为1121MPa和331Hv. |
Keyword | 超重力 电沉积 镍箔 机械性能 |
Indexed By | CSCD |
CSCD ID | CSCD:3763564 |
Citation statistics |
Cited Times:2[CSCD]
[CSCD Record]
|
Document Type | 期刊论文 |
Identifier | http://ir.ipe.ac.cn/handle/122111/10452 |
Collection | 研究所(批量导入) |
Recommended Citation GB/T 7714 | 王明涌,王志,刘婷,等. 超重力场电沉积镍箔及其机械性能[J]. 过程工程学报,2009(03):568-573. |
APA | 王明涌,王志,刘婷,&郭占成.(2009).超重力场电沉积镍箔及其机械性能.过程工程学报(03),568-573. |
MLA | 王明涌,et al."超重力场电沉积镍箔及其机械性能".过程工程学报 .03(2009):568-573. |
Files in This Item: | ||||||
File Name/Size | DocType | Version | Access | License | ||
超重力场电沉积镍箔及其机械性能_王明涌.(1600KB) | 期刊论文 | 出版稿 | 限制开放 | CC BY-NC-SA | Application Full Text |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment