CAS OpenIR  > 多相复杂系统国家重点实验室
Fabrication of homogeneous Mo-Cu composites using spherical molybdenum powders prepared by thermal plasma spheroidization process
Li, Baoqiang1,2; Jin, Huacheng1; Ding, Fei1; Bai, Liuyang1; Yuan, Fangli1
2018-06-01
Source PublicationINTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
ISSN0263-4368
Volume73Pages:13-21
AbstractIn this work, spherical and dense molybdenum particles with the average particle size of 16.6 mu m were synthesized by thermal plasma spheroidization process, and further used to fabricate homogeneous Mo-25 wt% Cu composites by infiltration method. The influence of infiltration temperature and holding time on the microstructure and properties of obtained Mo-Cu composites was investigated, and experimental results show that homogeneous Mo-Cu composites with high densification are obtained and the smooth surface of pores could facilitate the infiltration process. Specially, 98.6% of relative density of Mo-Cu composites is achieved and less than 10% irregular particles existing in spherical powders induce closed or half-connected pores in porous Mo skeleton, which shows adverse effect on full dense Mo-Cu composites obtaining. In addition, the highest microhardness of Mo-Cu composites (199 +/- 3.6 Hv) is obtained when infiltrated at 1300 degrees C for 1 h. Moreover, the maximum value of thermal conductivity (TC) of Mo-Cu composites is 154 W/(m.K), and this is lower than that predicted by theoretical models, which may be due to the small amounts of carbon in Mo-Cu composites and non-full dense of Mo-Cu composites. Furthermore, the carbon in porous skeleton could be well removed by controlling the atmosphere of sintering process. Importantly, Mo-25 wt% Cu composites fabricated by irregular particles exhibit non-uniform microstructure and low TC compared to that prepared by spherical particles, which would be due to the uneven pore distribution and closed pores in porous skeleton fabricated by irregular particles. These results well illustrate the superiority of spherical molybdenum particles on fabrication homogeneous Mo-Cu composites.
KeywordSpherical Molybdenum Particles Porous Mo Skeleton Infiltration Mo-cu Composites Microstructure
SubtypeArticle
WOS HeadingsScience & Technology ; Technology
DOI10.1016/j.ijrmhm.2018.01.022
Indexed BySCI
Language英语
WOS KeywordDENSE MO/CU COMPOSITES ; W-CU ; MECHANICAL-PROPERTIES ; TUNGSTEN POWDERS ; SINTERING BEHAVIOR ; MICROSTRUCTURE ; CONDUCTIVITY ; COPPER ; INFILTRATION ; MATRIX
WOS Research AreaMaterials Science ; Metallurgy & Metallurgical Engineering
WOS SubjectMaterials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
Funding OrganizationNational Natural Science Foundation of China (NSFC)(11535003) ; Fund of State Key Laboratory of Multiphase Complex Systems(Y525021140)
WOS IDWOS:000430028800003
Citation statistics
Document Type期刊论文
Identifierhttp://ir.ipe.ac.cn/handle/122111/24188
Collection多相复杂系统国家重点实验室
Affiliation1.Chinese Acad Sci, Inst Proc Engn, State Key Lab Multiphase Complex Syst, Beijing 100190, Peoples R China
2.UCAS, Beijing 100049, Peoples R China
Recommended Citation
GB/T 7714
Li, Baoqiang,Jin, Huacheng,Ding, Fei,et al. Fabrication of homogeneous Mo-Cu composites using spherical molybdenum powders prepared by thermal plasma spheroidization process[J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,2018,73:13-21.
APA Li, Baoqiang,Jin, Huacheng,Ding, Fei,Bai, Liuyang,&Yuan, Fangli.(2018).Fabrication of homogeneous Mo-Cu composites using spherical molybdenum powders prepared by thermal plasma spheroidization process.INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,73,13-21.
MLA Li, Baoqiang,et al."Fabrication of homogeneous Mo-Cu composites using spherical molybdenum powders prepared by thermal plasma spheroidization process".INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS 73(2018):13-21.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Li, Baoqiang]'s Articles
[Jin, Huacheng]'s Articles
[Ding, Fei]'s Articles
Baidu academic
Similar articles in Baidu academic
[Li, Baoqiang]'s Articles
[Jin, Huacheng]'s Articles
[Ding, Fei]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Li, Baoqiang]'s Articles
[Jin, Huacheng]'s Articles
[Ding, Fei]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.