Knowledge Management System Of Institute of process engineering,CAS
| Study on thermal shock behavior of YSZ abradable sealing coating prepared by mixed solution precursor plasma spraying | |
| Sun, X. M.1; Du, L. Z.1; Lan, H.1,2; Zhang, H. F.1; Liu, R. Y.1; Wang, Z. G.1; Fang, S. G.1; Huang, C. B.1; Liu, Z. A.3; Zhang, W. G.1 | |
| 2020-09-15 | |
| Source Publication | SURFACE & COATINGS TECHNOLOGY
 |
| ISSN | 0257-8972 |
| Volume | 397Pages:9 |
| Abstract | In this study, a yttria-stabilized zirconia (YSZ) ceramic matrix abradable sealing coating named 8YSZ-5 was successfully prepared by mixed solution precursor plasma spraying, and its thermal shock behavior was studied in detail. During the thermal shock cycles, the microstructure, residual stress and phase stability of the 8YSZ-5 coating were examined by using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) technique. The results show that the 8YSZ-5 coating has excellent thermal shock resistance through a 200-cycle thermal shock test at 1150 degrees C. During the thermal shock cycles, the spallation only existed in a small scale in the edge of the 8YSZ-5 coating, and the coating always maintains a stable phase composition of tetragonal structure. The residual stress study shows that the in-plane residual stress of the 8YSZ-5 coating is detected to be compressive stress, which increases with increasing the thermal shock cycles. The microstructure analysis shows that as the thermal shock test progresses, the number of the pores in the coating gradually decreases due to their spontaneous closure and the average size of the grains gradually increases. The mechanical properties investigation shows that the hardness and surface friction coefficient of the 8YSZ-5 abradable sealing coating increase gradually, while the bond strength of the coating decreases by 50% after 200 thermal shock cycles. The implications of this study are important for the design of advanced abradable sealing coatings prepared by the mixed solution precursor plasma spraying technology. |
| Keyword | Mixed solution precursor plasma spraying Yttria-stabilized zirconia Abradable sealing coating Nanostructured coating Thermal shock |
| DOI | 10.1016/j.surfcoat.2020.126045 |
| Language | 英语 |
| WOS Keyword | BARRIER COATINGS ; TRIBOLOGICAL CHARACTERIZATION ; PHASE-STABILITY ; MICROSTRUCTURE ; DEPOSITION ; RESISTANCE ; PROPERTY ; MODULUS ; FAILURE |
| Funding Project | National Natural Science Foundation of China[51671180] ; National Key Research and Development Program of China[2018YFC1902401] ; Key Deployment Projects of the Chinese Academy of Sciences[ZDRW-CN-2019-01] ; Projects of the Innovation Academy for Green Manufacture, Chinese Academy of Sciences (IAGM)[2020DB04] |
| WOS Research Area | Materials Science ; Physics |
| WOS Subject | Materials Science, Coatings & Films ; Physics, Applied |
| Funding Organization | National Natural Science Foundation of China ; National Key Research and Development Program of China ; Key Deployment Projects of the Chinese Academy of Sciences ; Projects of the Innovation Academy for Green Manufacture, Chinese Academy of Sciences (IAGM) |
| WOS ID | WOS:000543496400048 |
| Publisher | ELSEVIER SCIENCE SA |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.ipe.ac.cn/handle/122111/41326 |
| Collection | 中国科学院过程工程研究所 |
| Corresponding Author | Du, L. Z. |
| Affiliation | 1.Chinese Acad Sci, Inst Proc Engn, State Key Lab Multiphase Complex Syst, Beijing 100190, Peoples R China 2.Chinese Acad Sci, Innovat Acad Green Manufacture, Beijing 100190, Peoples R China 3.Qufu Normal Univ, Expt Teaching & Equipment Management Ctr, Qufu 273165, Shandong, Peoples R China |
| Recommended Citation GB/T 7714 | Sun, X. M.,Du, L. Z.,Lan, H.,et al. Study on thermal shock behavior of YSZ abradable sealing coating prepared by mixed solution precursor plasma spraying[J]. SURFACE & COATINGS TECHNOLOGY,2020,397:9. |
| APA | Sun, X. M..,Du, L. Z..,Lan, H..,Zhang, H. F..,Liu, R. Y..,...&Zhang, W. G..(2020).Study on thermal shock behavior of YSZ abradable sealing coating prepared by mixed solution precursor plasma spraying.SURFACE & COATINGS TECHNOLOGY,397,9. |
| MLA | Sun, X. M.,et al."Study on thermal shock behavior of YSZ abradable sealing coating prepared by mixed solution precursor plasma spraying".SURFACE & COATINGS TECHNOLOGY 397(2020):9. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment