Knowledge Management System Of Institute of process engineering,CAS
| In Situ Growth of Carbon Nanotubes on Ti Powder for Strengthening of Ti Matrix Composite via Nanotube-Particle Dual Morphology | |
| Li, S. F.1,2,3,4; Cui, J. Y.1,4; Yang, L. F.5; Yang, Y. F.1,2,3,4; Misra, R. D. K.6; Zheng, R.2; Zuo, T. T.3,7; Gao, Z. S.2,7; Huang, Z. T.8 | |
| 2020-09-12 | |
| Source Publication | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
 |
| ISSN | 1073-5623 |
| Pages | 13 |
| Abstract | In situsynthesis of carbon nanotubes (CNTs) on Ti powder decorated with Ni catalyst enabled us to obtain a high-quality CNTs/Ti composite powderviafluidized bed chemical vapor deposition (FBCVD) process. The composite powder was characterized by a combination of high structural integrity and uniform dispersion of CNTs, which is not obtained by traditional ball-milling route. These advantages enabled the retention of CNTs in the near-fully dense titanium matrix composite (TMC), together with the uniform dispersion of TiC particles. The CNTs and TiC particles coordinated with each other and contributed to a synergistic effect involving load transfer from the matrix to CNTs and dispersion strengthening of TiC particles. The nanotube-particle-reinforced TMC exhibited superior mechanical properties in comparison to single-phase-reinforced TMCs. The catalytic behavior of Ni,controllablesynthesis of CNTs,theretention behavior of CNTs, and the formation mechanism of TiC particles during the sintering process are discussed in detail. Graphic |
| DOI | 10.1007/s11661-020-05988-7 |
| Language | 英语 |
| WOS Keyword | MECHANICAL-PROPERTIES ; NANOSTRUCTURED CARBON ; PHASE EVOLUTION ; ARCHITECTURE ; CRYSTALLIZATION ; MICROSTRUCTURE ; NANOCOMPOSITES ; METALLURGY ; DEPOSITION |
| Funding Project | DNL Cooperation Fund, CAS[DNL180304] ; National Natural Science Foundation of China[51801201] ; National Natural Science Foundation of China[51874271] ; Scientific Instrument Developing Project of the Chinese Academy of Sciences[YJKYYQ20190011] ; Key Research Program of Frontier Sciences, Chinese Academy of Sciences[QYZDB-SSW-JSC045] |
| WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| Funding Organization | DNL Cooperation Fund, CAS ; National Natural Science Foundation of China ; Scientific Instrument Developing Project of the Chinese Academy of Sciences ; Key Research Program of Frontier Sciences, Chinese Academy of Sciences |
| WOS ID | WOS:000568641200002 |
| Publisher | SPRINGER |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.ipe.ac.cn/handle/122111/41999 |
| Collection | 中国科学院过程工程研究所 |
| Corresponding Author | Yang, Y. F. |
| Affiliation | 1.Chinese Acad Sci, Inst Proc Engn, 1 Zhongguancun North 2nd St, Beijing 100190, Peoples R China 2.Univ Chinese Acad Sci, 19 A Yuquan Rd, Beijing 100049, Peoples R China 3.Dalian Natl Lab Clean Energy, 457 Zhongshan Rd, Dalian 116023, Peoples R China 4.Nanjing IPE Inst Green Mfg Ind, 300 Zhihui Rd, Nanjing 211135, Peoples R China 5.Sun Yat Sen Univ, Sch Chem, 135 Xingang Xi Rd, Guangzhou 510275, Peoples R China 6.Univ Texas El Paso, 500 W Univ Ave, El Paso, TX 79968 USA 7.Chinese Acad Sci, Inst Elect Engn, 6 Beiertiao, Beijing 100190, Peoples R China 8.AVIC Mfg Technol Inst, 1 Chaoyang Rd, Beijing 100024, Peoples R China |
| Recommended Citation GB/T 7714 | Li, S. F.,Cui, J. Y.,Yang, L. F.,et al. In Situ Growth of Carbon Nanotubes on Ti Powder for Strengthening of Ti Matrix Composite via Nanotube-Particle Dual Morphology[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,2020:13. |
| APA | Li, S. F..,Cui, J. Y..,Yang, L. F..,Yang, Y. F..,Misra, R. D. K..,...&Huang, Z. T..(2020).In Situ Growth of Carbon Nanotubes on Ti Powder for Strengthening of Ti Matrix Composite via Nanotube-Particle Dual Morphology.METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,13. |
| MLA | Li, S. F.,et al."In Situ Growth of Carbon Nanotubes on Ti Powder for Strengthening of Ti Matrix Composite via Nanotube-Particle Dual Morphology".METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020):13. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment