Knowledge Management System Of Institute of process engineering,CAS
| 采用溶胶-凝胶法在多孔氧化铝模板上制备立方相WO_3纳米线 | |
| Xu Yuxing1; Tan Qiangqiang1; Tang Zilong2; Zhang Zhongtai2; Yuan Zhangfu1 | |
| 2010 | |
| Source Publication | 稀有金属材料与工程
 |
| ISSN | 1002-185X |
| Volume | 39.0Issue:005Pages:753 |
| Abstract | 采用溶胶-凝胶法在纳米孔氧化铝模板上成功制备形貌各异的WO3纳米线。X射线衍射分析表明所制备的WO3纳米线为立方相结构。经扫描电子显微镜观察发现产物多数为菊花状WO3纳米线,其直径约10～80nm,长约几微米。与空气气氛相比,氩气气氛更有助于WCl6三嵌段共聚物溶胶在多孔氧化铝模板上形成形貌各异的WO3纳米线。 |
| Keyword | 溶胶-凝胶 纳米孔氧化铝模板 WO3纳米线 |
| Language | 英语 |
| Document Type | 期刊论文 |
| Identifier | http://ir.ipe.ac.cn/handle/122111/45527 |
| Collection | 中国科学院过程工程研究所 |
| Affiliation | 1.中国科学院过程工程研究所 2.清华大学 |
| First Author Affilication | 中国科学院过程工程研究所 |
| Recommended Citation GB/T 7714 | Xu Yuxing,Tan Qiangqiang,Tang Zilong,等. 采用溶胶-凝胶法在多孔氧化铝模板上制备立方相WO_3纳米线[J]. 稀有金属材料与工程,2010,39.0(005):753. |
| APA | Xu Yuxing,Tan Qiangqiang,Tang Zilong,Zhang Zhongtai,&Yuan Zhangfu.(2010).采用溶胶-凝胶法在多孔氧化铝模板上制备立方相WO_3纳米线.稀有金属材料与工程,39.0(005),753. |
| MLA | Xu Yuxing,et al."采用溶胶-凝胶法在多孔氧化铝模板上制备立方相WO_3纳米线".稀有金属材料与工程 39.0.005(2010):753. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment